Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
12
Step 2: Attach the drawbar
•
To fix the drawbar, first insert the round end into the receptacle on the left
front of the trailer (Fig. 1).
•
Secure the inserted rod with the supplied tensioner
(pos. a) and the safety pin (Fig. 2).
•
The bend of the drawbar should now point to the right (in the direction of
travel).
Attention: Make sure that the drawbar is securely connected to the trailer.
A loose drawbar can cause you to lose control of the trailer while driving and
become a hazard on the road.
Step 3: Unfold the trailer
•
Place the trailer normally on the ground and lift the side panels until they
are in a vertical position.
•
Now bring the bar on the front panel into line with the frame bars (see
photo).
•
Screw the bar to the frame with the two screws (with star-shaped
handles):
Publicidad
Tabla de contenido
