Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
This device does not require installation: it should
only be used as a portable device.
- Remove all packaging material and place the heater
in the desired place considering the safety
precautions listed above. Make sure that a safety
distance of about 100 cm is guaranteed between the
heater and the furniture, curtains, etc..
- Unroll the power cord and plug into an outlet. Make
sure the power supply is compatible with 230 V ~,
50 Hz.
- Connect the heater by turning the power switch
to one of the 3 positions (the pilot light will turn
on):
= Ventilator only
I Low power
(900W) II High
power (1500W)
40
Publicidad
Tabla de contenido
