Stryker 1488 Serie Manual Del Usuario página 44

Guidance and Manufacturer's Declaration: Electromagnetic Immunity
1488 HD Camera is intended for use in the electromagnetic environment specified below.
The customer or the user of 1488 HD Camera should ensure that it is used in such an environment.
Immunity Test
Electrostatic Discharge
(ESD) IEC61000-4-2
Electrical fast transient/
burst IEC61000-4-4
Surge
IEC61000-4-5
Voltage dips, short
interruptions and
voltage variations on
power supply input lines
IEC61000-4-11
Power frequency
(50/60Hz) magnetic field
IEC 61000-4-8
NOTE: Ut is the AC mains voltage prior to application of the test level.
EN-40
All manuals and user guides at all-guides.com
IEC 60601 Test Level
±6kV contact
±8kV air
±2kV for power supply
lines
±1kV for input/output
lines
±1kV differential mode
±2kV common mode
±0.5, 1, 2kV common
<5% Ut (>95% dip in <5% Ut (>95% dip in Ut)
Ut) for 0.5 cycle
40% Ut (60% dip in 40% Ut (60% dip in Ut)
Ut) for 5 cycles
70% Ut (30% dip in 70% Ut (30% dip in Ut)
Ut) for 25 cycles
<5% Ut (>95% dip in <5% Ut (>95% dip in Ut)
Ut) for 5 sec.
3 A/m
Compliance Level
±2,4,6kV contact
wood, concrete, or
±2,4,8kV air
ceramic tile. If floors
synthetic material,
the relative humidity
±2kV line to ground Mains power quality
should be that of a
±1kV line to line
typical commercial or
hospital environment.
±0.5, 1kV differential Mains power quality
mode should be that of a
typical commercial or
hospital environment.
mode
Mains power quality
for 0.5 cycle should be that of a
typical commercial or
hospital environment.
for 5 cycles
If the user of 1488
HD Camera requires
continued operation
for 25 cycles
during power mains
recommended that
for 5 sec.
be powered from an
uninterruptible power
supply or a battery.
N/A
should be at levels
typical location in a
typical commercial or
hospital environment.
Electromagnetic
Environment:
Guidance
Floors should be
are covered with
should be at least
30%.
interruptions, it is
1488 HD Camera
Power-frequency
magnetic fields
characteristic of a