EN
3
2
1
1. VOLUME SWITCH
2. MUSIC SELECTION BUTTON
3. CHARGING LIGHT
IMPORTANT WARNINGS!
Please Keep instruction guide for future reference
as it includes important information. You can also
find these instructions at tommeetippee.com.
WARNING! Attach this toy out of the reach of the
child. To prevent possible injury by entanglement,
remove this toy when the child starts trying to get
up on hands and knees in a crawling position.
WARNING!
For the purpose of recharging the battery, only use
the detachable unit provided with this toy. Battery
Pack must be removed before washing the plush
toy. Soft Toys are not to be left inside the babies
cot. Ensure the product is hung outside of the cot
when in use with fabric loop so it is out of reach of
the child. Do not use any accessories other than
those supplied with this appliance. Misuse of the
product may result in the risk of fire, electrical
shock and/or personal injury.
Caution do not submerge in water. Use with a 5V 1A
or 5v 2A plug adaptor. Only plugs that are
approved to BS1363 should be used (UK only). This
toy is only to be connected to Class II equipment
bearing the following symbol (**).
This product comes with 1 lithium Ion rechargeable
battery (520mAh). Keep product out of child's
reach when product is charging. Rechargeable
battery is for adult use only. Keep the USB cable out
of reach of children. The battery box must be pulled
out of the plush toy during charging, do not charge
whilst still inside the plush toy. Do not drop or cause
any impact to the sound sleep aid. Do not use the
sound sleep aid if any part of it is cracked or
damaged. Do not attempt to remove, replace or
repair the lithium-ion battery (it should only be
removed by recycling centres and can be done by
removing the four screws in the sound box
enclosure). Do not use damaged USB leads,
adaptors or loose electrical sockets. Do not pull the
USB lead excessively when disconnecting it. Do not
use the sound sleep aid with wet hands. Do not
CrySensor
is listening
expose the sound sleep aid to very cold or very hot
temperatures. Ensure your sound sleep aid is turned
o when not in use.
Ensure any device containing batteries is disposed
of in accordance with local laws. Remove battery
unit and wash on cold cycle. Voltage (5VDC), Amps
(500mA) and Watts (2.5W) of appliance.
INFORMATION ON THE DISPOSAL FOR WASTE
ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
This symbol* on the products and accompanying
documents means that used electrical and
electronic products should not be mixed with
general household waste. For proper disposal for
treatment, recovery and recycling, please take these
products to designated collection points where
they will be accepted on a free of charge basis. In
some countries you may be able to return your
products to your local retailer upon the purchase of
a new product. Disposing of this product correctly
will help you save valuable resources and prevent
any possible e ects on human health and the
environment, which could otherwise arise from
inappropriate waste handling. Please contact your
local authority for further details of your nearest
collection point for WEEE. Penalties may be
applicable for the incorrect disposal of this product
in accordance with national legislation.
If damaged within retail warranty period, this
product should be exchanged at place of purchase.
The manufacturer will then be made aware. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1.) This device may not cause harmful interference
and 2.) this device must accept any interference
received including interference that may cause
undesired operation. This equipment has been
tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation. This equipment
3 hours
generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment o and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
di erent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Caution: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.