Main Features; Technical Specifications Of Midland Btx2 Pro; Charging Batteries - Midland BTX2 PRO Manual De Instrucciones

MIDLAND BTX2 PRO
Multi rider intercom system
Midland BTX2 PRO is an intercom system solution with conference communication for
motor cyclists.The design is very slim and aerodynamic, all the main functions are easy to
operate thanks to the three big buttons placed on the front of the unit. Midland BTX2 PRO
is fixed on the helmet using the adhesive plate or the screw mounting clamp. Thanks to
the audio kit with ultra slim speakers you can enjoy high quality stereo music while riding.

Main features

› Intercom "one to one" up to 1 Km distance.
› Conference 4 people
› Connect up to 4 people for "one to one" intercom communication
› Talk2All feature to connect other brand intercom
› FM Radio Stereo with RDS
› Music Share (Driver and Passenger)
› Connect your phone to receive and place phone call and listen to stereo music
› Support for 2 phones
› Connect your GPS for voice street indications
› Connection for PMR466 radio with internal or external Bluetooth
› AUX wired connection for MP3 player (optional cable)
› Setup and Firmware update via USB connection to a PC
Midland BTX2 PRO is available in two versions:
› Single Midland BTX2 PRO Intercom kit with one unit only
› Twin Midland BTX2 PRO Intercom kit with with two units
Depending on the model purchased, the package contains the following parts:
Midland BTX2 PRO single
› 1 BTX2 PRO communication unit
› 1 Slide-in mounting kit with two Hi-Fi stereo speakers
› 1 microphone with boom and 1 wired microphone
› 1 plate with bi-adhesive strip to fix the unit onto the helmet
› 1 USB cable
Midland BTX2 PRO Twin
2
All manuals and user guides at all-guides.com
› 2 BTX2 PRO communication units
› 2 Slide-in mounting kit with two Hi-Fi stereo speakers
› 2 microphones with boom and 2 wired microphones
› 2 plates with bi-adhesive strip to fix the unit onto the helmet
› 1 USB cable with with double plug
The units included in the TWIN kit are already paired on Middle button and therefore can
be immediately used in Intercom mode.

Technical specifications of Midland BTX2 PRO

General:
› Bluetooth ver. 4.2 Stereo (Handsfree/A2DP/AVRCP protocol)
› Frequency: 2.4 GHz - Max power 100mW
› AGC system automatically controls the volume in relation to background noise
› Voice (VOX) or manual communications activation
› Manual controls to enable: telephone, intercom and wire connection
› Fully waterproof
› Lithium battery with 30 hours talk time
› Recharge time: app. 2 hours
Bluetooth connections:
With identical device for Rider to Pillion or Bike-to-Bike Intercom mode, up to a ma-
ximum distance range of 1Km without obstructions and interferences (the riders must
be always in sight).
Bluetooth devices:
› Mobile phone with MP3 player Stereo (A2DP protocol) and GPS navigator
› PMR446 transceivers (with built-in or external Bluetooth connection) for group
Wire connections:
› For stereo audio input like iPod/MP3 player (with optional cable)
Attention: Midland BTX2 PRO is designed to withstand rain and water. However, if it is
raining, always verify that the rubber cap protecting the recharging sockets is fully fitted.

Charging batteries

Attention: Make sure that the unit is fully charged before use. Allow at least 3 hours for a full
charge before using the unit for the first time.
bike-to-bike communications
www.midlandeurope.com