Display Removal Instructions - CHIEF D8089 Manual Del Usuario

Installation Instructions

DISPLAY REMOVAL INSTRUCTIONS

To perform service on the display, remove the display from the
wall plate as follows:
WARNING: Disconnect power and audio/video cables
before removing the display from its wall
mount.
1. If applicable, remove the self tapping screws (70) and/or
padlocks from both sides of the wall plate. This hardware
provides security (see Figure 11).
2. Slide the security latches out on both sides to disengage
the display from the wall plate. See Figure 11.
WARNING: The plasma display is heavy and extremely
fragile. Exercise caution when removing the
display from the mount to avoid equipment
damage or personal injury.
3. With an assistant, lift the display up and off the wall plate
(see Figure 12) to remove the display from the wall.
Figure 11. Remove Security Hardware
Figure 12. Remove Display
MSP-DCCPDPT
9