Publicidad
Idiomas disponibles
Idiomas disponibles
Technical Data
Chisel shank: Ø 10 mm
Chisel shank length: 133 mm
Blow per minute: 4500
Working pressure: 6.3 Bar (90 PSI)
113 L/min (4 CFM)
Air consumption:
Air Inlet: 1/4"
Stroke: 41 mm
Noise level: LpA: 103 dB (A)
LwA: 114 dB (A)
Vibration level: ahd = 9,98 m/s²
K = 1,5 m/s²
Weight: 1,18 kg
Please read these instructions carefully before use or maintain the air tool described. Keep
instructions for future reference.
Description
This air hammer is designed for cutting through rusted metal or bolts and removing mortar from
cement blocks or bricks.
General Safety
1. This air hammer is a part of a high pressure system. Do not exceed maximum operating pressure
of the air tool 90 PSI (6.3 Bar). The hammer could explore and result in death or serious injury.
2. Disconnect the air drill from air compressor before changing tools or accessories, servicing and
during non operation.
3. Always ear safety glasses and using hearing protection during operation.
4. Do not wear loose fitting clothing and jewelry which may become caught in moving parts and
result in serious injury.
5. Do not depress trigger when connecting the air hose.
6. Never trigger the tool when not applied to a work object. Accessories must be securely attached.
7. Make sure spring retainer, all connections are secure and check air hoses for weak or worn
condition before each use.
8. WARNING !!! Disconnect air supply before installing or any maintenance notes.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
Air Hammer Chisel Set
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
3213
L
d . l h
a t s
w
s
@
o f n i
: l i
Publicidad
