Metabo HPT NR 83A5 Instrucciones Y Manual De Seguridad página 17

1 Press the stop lever and slide the nail feeder
forward quietly.
2 Pull out nails from the top of the magazine.
Nail Feeder
Magazine
<NR83AA5>
(1) Insert nail strip into rear of magazine.
Magazine
(2) Slide the nail strip forward in the magazine.
The nail strip should pass the nail stopper.
000Book̲NR83A5̲US̲metabo.indb 17 000Book̲NR83A5̲US̲metabo.indb 17
1
Stop Lever
1
2
Nail Strip
Nail Stopper
(3) Pull the nail feeder (B) back to engage the nail feeder
(A) to the nail strip.
Nail Feeder (A)
Nail Feeder (B)
NOTE:
Quietly push the Nail Feeders (A) and (B) against the
nail.
If the Nail Feeders (A) and (B) are released from
backward the magazine and bumped against the nail,
the connecting paper of the nail can be damaged.
Use nail strip of more than 5 nails.
The Nailer is now ready to operate.
Removing the nails:
WARNING
Disconnect air hose from Nailer when
removing nails from the magazine.
1 Pull the nail feeder (B) backward.
2 Return the nail feeder (B) forward quietly while
pushing the nail feeder (A).
3 Push the nail stopper toward the magazine side,
and pull out nails from the back of the magazine.
English
17
2018/05/22 13:58:56 2018/05/22 13:58:56