Stryker 8203-026-000 Manual Del Usuario página 5

8203-026-700 Rev-AA
Definitions
The symbols located on the equipment and/or labeling
are defined in this section or in the Symbol Definition
Chart. See the Symbol Definition Chart supplied with
the equipment.
Colors
The collet nose is marked with a color stripe to
facilitate wire/pin size selection. See Description table
for diameter ranges.
COLOR DEFINITION
This collet is intended for use with
Green
small diameter wires/pins (0.7 to
2.0 mm).
This collet is intended for use with
Orange
medium diameter pins (2.0 to
3.2 mm).
Blue
This collet is intended for use with
large diameter pins (3.0 to 4.2 mm).
www.stryker.com
Symbols
SYMBOL DEFINITION
General warning sign
Alignment mark
Allowable size range of small
S 0.7 1.4mm
(S) diameter wires/pins
Allowable size range of
M 1.1 1.6mm
medium (M) diameter wires/
pins
Allowable size range of large
L 1.6 2.0 mm
(L) diameter wires/pins
0.7
Single Trigger — This
attachment is intended for
use with single trigger rotary
2.0
handpieces only.
mm
0.7
Dual Trigger — This
attachment is intended for use
with either single trigger or
2.0
dual trigger rotary handpieces.
mm
0.7
Full wire/pin diameter range
of collet
2.0
mm
EN
5