BGS technic 8545 Manual De Instrucciones página 8

Close the shut-off valve on the suction hose (2).
The valve is closed when the handle of the valve is positioned
crosswise to the flow direction.
Close the shut-off valve on the bottom side of the measuring cylinder.
The valve is closed when the butterfly handle is positioned crosswise
to the flow direction.
Close the shut-off valve at the tank base.
The valve is closed when the butterfly handle is positioned crosswise
to the flow direction.
Insert the pipe elbow at the end of the emptying hose into a waste oil
tank.
Connect the compressed air supply with the compressed air
connection and open the valve.
The connection is equipped with a safety valve. This opens once the
maximum permissible pressure is reached.
Slowly open the shut-off valve on the tank base. In doing so, make
sure that the pipe elbow of the emptying hose remains in the waste oil
tank.
Once the emptying process has finished, close the valve at the
compressed air connection and separate the unit from the
compressed air supply.
Finally, open the valve on the compressed air connection again in
order to release any pressure still present in the tank.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed