Measurement Display; Note On Guest Mode - boso medicus exclusive Manual De Instrucciones

medicus_exclusive_5spr_1402sd.qxd

Measurement display

After the end of the measurement, the in-
built valve opens automatically and the
cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed (see
illustration 7).
:
Illustration 7
All manuals and user guides at all-guides.com
10.02.2014 14:47 Uhr
SYS.
mmHg.
DIA.
mmHg.
PUL.
/min.
Seite 59
The measurement is stored automatically
(except for guest mode, see below). If the
memory store is full (90 measurements),
the oldest measurement is deleted and
the current one stored.

Note on guest mode:

If a measurement value is not be kept,
press „M" while the measured values are
still on display.
Invalid measurements with an "Err" mess-
age (see page 65) are not stored.
If the symbol appears after the meas-
urement, it is recommended that the
measurement is repeated, holding the
arm completely still. If the symbol
59