Symbols - Imetec INTELLIVAPOR K3 Instrucciones Para El Uso

• Always disconnect the appliance from the mains supply before
cleaning or performing maintenance and when the appliance is
not in use.
EN
• If the appliance is faulty or malfunctions, switch it off and do not
tamper with it. Contact an authorised technical service centre for
any repairs.
• If the supply cord is damaged it must be replaced by an authorised
technical service centre, so as to prevent all risks.
• The electrical safety of this appliance is only guaranteed when it
is connected correctly to an effective earthing system as required
by applicable electrical safety standards. This important safety
requirement must be verified before connecting the appliance
to the mains supply. If in doubt request a thorough check of the
system by a qualified technician.
• DO NOT immerse this appliance into water or other liquids.
• DO NOT leave this appliance in contact with fabric and surfaces
that are easily flammable or can get damaged with heat.
• This appliance must be used and rested on a flat, stable surface.
• When placing the iron on its stand, ensure that the surface on
which the stand is placed is stable.
• This appliance is not to be used if it has been dropped, if there are
visible signs of damage or if it is leaking water.
• DO NOT use chemical additives, scented substances or descaling
agents.
• The plug must be removed from the socket-outlet before the water
reservoir is filled with water.
• For the features of the appliance, refer to the external packaging.
• Use the appliance only with the supplied accessories that are an
essential part of the appliance.
Warning
Hot surface
12

SYMBOLS

Prohibited
Note