Description Of The Appliance And Accessories; Use - Imetec INTELLIVAPOR K3 Instrucciones Para El Uso

DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer the illustrative guide on page I to check your appliance's equipment.
1. Plate temperature LED
2. Spray button
3. Super-steam button
4. Steam selector
5. Water fill-up opening
6. Spray
7. Calc clean button
WARNING! The iron must not be used if it is has been
dropped, if there is visible damage or if it leaks water.
WARNING: TYPE OF WATER TO BE USED
Use only:
• demineralised water for iron.
WARNING! Do not pour diluting agents, scented liquids
or descaling agents into the reservoir as the use of these
substances can damage the product.
WARNING! Do not use water from dryers, air conditioners,
water from tumble dryers, filtered water with water softeners
and rain water.
The reservoir may contain some water as each product is tested before being put on the
market.
Verify that the plug (13) is disconnected from the socket.
Set the steam selector (4) to 0 [Fig. B].
Open the latch (5).
Set the iron in a position that facilitates filling the water and prevents it from overflowing.
Slowly pour the water into the reservoir (10) using the special cup (14) [Fig. C].
Do not exceed the maximum (MAX) level indicated on the reservoir (8).
Close the hatch (5).
SWITCHING ON
Set the iron upright.
Insert the plug (13) in the socket.
8. Max fill-up level
9. Plate with steam holes
10. Water reservoir
11. O/I switch
12. Technical data
13. Plug
14. Water cup

USE

Max
13
EN