aqprox appRP01 Guia Del Usuario página 7

Chapter 3: Installation and Configuration
• Please connect your repeater APPRP01 to a power
outlet.
• Use the RJ-45 cable that is provided to connect one
end to the repeater and the other to your computer.
• Assign to the network card of your computer the
following IP addresses:
a. IP address: 192.168.10.x (The x can be from
the number 0 to 255)
b. Subnet Mask: 255.255.255.0
c. Gateway: 192.168.10.1
• Go to your web browser and type in the address bar
the following: 192.168.10.1. Your browser automatically
prompts a user name and password or password. To
access the repeater configuration please insert in the
"user" and "password" as follows:
User name:
Password:
admin
admin
5