Extra Options - Marmitek M EGAVIEW20 Modo De Empleo

All manuals and user guides at all-guides.com
but only frequencies, you can look this up in the enclosed table in the
back of this manual. This set channel now show s the connected A/V
device and from now on you can w atch this on the channel you selected.
6. Now check if there is no interference on the TV-channels close by. If
there is, you need to find tw o (or if possible three) other free channels
and set the modulator to that one.
If you have multiple TV sets in your home (connected to the same antenna
netw ork), then you can w atch this signal on the other TV sets as w ell.
How ever first you need to set the right channel on every TV.

6. EXTRA OPTIONS

Inf rared ext ension
Do you w ant to operate your DVD-player or satellite tuner in the living
room from your bedroom? Or operate devices in a closed cabinet?
M armitek infrared extenders make sure that the signal of your remote
control goes right through cabinet doors, w alls and floors.
• The VideoControl3 sends the signal of your remote control back to
another room via the existing antenna cable.
• Right through w alls and ceilings w ith your existing remote control? This
is possible w ith the Pow ermidXS. The w ireless solution for extending
the signal of your remote control!
Connect ing m ult iple devices
• Do you w ant to connect multiple A/V devices? W ith the Connect 236
you can connect all of your devices to your M egaView 20 w ith just one
cable, preserving the quality.
• You can also connect a second A/V device using a second
M egaView 20. By selecting another TV channel on it you can w atch
both devices at different places.
A/V Cam era
Do you w ant a more comfortable and safer feeling in and around your
house? W ith the M egaCam1 you can keep an eye on your house, garden,
garage and drivew ay. Connect this to your M egaView 20 and you can w atch
these images on TV in various rooms in your house.
8 © M ARM ITEK