Stihl MSA 160 C Manual De Instrucciones página 88

English
Specifications
Battery
Type: Lithium ion
The machine can be used with STIHL
type AP batteries.
The running time of the machine
depends on the energy of the battery
(e. g., 80 Wh with AP 80 or 160 Wh with
AP 160).
Charger
AL 100
Mains voltage: 220 - 240 V
Rated current: 0.6 A
Frequency: 50 Hz
Power consumption: 75 W
Charging current: 1.6 A
Protection class: II, E
AL 300
Mains voltage: 220 - 240 V
Rated current: 2.6 A
Frequency: 50 Hz
Power consumption: 320 W
Charging current: 6.5 A
Protection class: II, E
86
All manuals and user guides at all-guides.com
Charging times
AL 100
with AP 80:
– up to 80 % capacity:
– up to 100 % capacity: 100 min
with AP 160:
– up to 80 % capacity:
– up to 100 % capacity: 165 min
AL 300
with AP 80:
– up to 80 % capacity:
– up to 100 % capacity: 50 min
with AP 160:
– up to 80 % capacity:
– up to 100 % capacity: 60 min
Chain lubrication
Fully automatic, speed-controlled oil
pump with reciprocating piston
Oil tank capacity: 0.21 l
Weight
With cutting attachment, without battery
MSA 160 C: 3.2 kg
Cutting attachment
Guide bars Rollomatic E Mini 1/4" Picco
Cutting length: 30 cm
Pitch: 1/4" P (6.35 mm)
Groove width: 1.1 mm
Sprocket nose: 10-tooth
Saw chains 1/4" Picco
Picco Micro (71 PM3)
Pitch:
Drive link gauge:
70 min
Chain sprocket
7-tooth for 1/4" P
150 min
Sound and vibration levels
Sound and vibration levels are
determined on the basis of the operating
25 min
status at nominal maximum speed.
For further details concerning
compliance with the Physical Agents
Directive Vibration 2002/44/EEC, see
35 min
www.stihl.com/vib/
Sound pressure level L
EN 60745 - 2 - 13
MSA 160 C:
Sound power level L
MSA 160 C:
Vibration level a
MSA 160 C: 2.0 m/s
The K - factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K - factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
1/4" P (6.35 mm)
1.1 mm
to
p
88 dB(A)
to EN 60745 - 2 - 13
w
99 dB(A)
to EN 60745 - 2 - 13
hv
Handle, left Handle, right
2 2
2.0 m/s
2
MSA 160 C