Carrier XCT 7 40VU0051-7E-QEE Manual Del Propietario E Instalación página 13

Maintenance
Install the air cleaner & Inlet guide plate
1.Install the air cleaner: The method is contrary to the method ofremoving the dust screen.
2.Install the Inlet guide plate: As shown below, the rack on the return air guide plate is inserted into the gear box.
Cleaning the air outlet port and the shell
• Don't use gasoline, benzene, diluents, polishing powder or liquid insecticide to clean them.
• Do not clean them with hot water of above 50°C to avoid fading or distorting.
• Wipe them with soft dry cloth.
• Water or neutral dry cleanser is recommended if the dust cannot be removed.
• The Wind Deflector can be dismantled to clean.
• Do not wipe the wind deflector with water forcibly to avoid the floss falling off.
The hole of gear wheel box
Attention
Attention
Rack
5