Peavey PVX pSub Manual Del Usuario página 32

SPECIFICATIONS
Frequency Range (-10 dB, Half Space):
43 Hz – 180 Hz*
*Crossover Control Full CW
Frequency Response, 1 Meter On-axis, Swept-sine In
Anechoic Environment (-6 dB):
48 Hz – 138 Hz*
*Crossover Control Full CW
Power Amp Rating, Total Power Output:
800 watts peak available power
Continuous Power: 470 watts into 4 ohms
Electronic Input Impedance (Nominal):
Line In: 2.2 k ohms balanced (XLR or 1/4"), 10 k ohms
unbalanced 1/4"
Sound Pressure Level, 1 Watt, 1 Meter In Anechoic
Environment:
97 dB SPL
Maximum Sound Pressure Level (1 meter):
123 dB SPL continuous
127 dB SPL peak
Transducer Complement:
15" premium heavy-duty woofer, 3" voice coil
Box Tuning Frequency:
50 Hz
Input Connections:
One combo female XLR/ 1/4" phone jack providing balanced
or unbalanced operation.
Output Connections:
Two High Pass Outputs, independently electrically buffered,
with switchable output level pad.
One Full Range Thru, electrically buffered.
Controls:
Level: Provides +/- 20 dB gain adjustment
Crossover Frequency Adjust: Adjusts electrical crossover
frequency from 90 Hz to 180 Hz, continuously variable.
Kosmos C: Provides bass enhancement processing.
®
Polarity Switch: Provides either 0 degrees or 180 degrees
sub woofer polarity
Ground Lift Switch: For input
Electronic Crossover
Continuously variable from 90 Hz to 180 Hz.
Low Pass slope: 24 dB/octave
High Pass Output slope: 18 dB/octave
Infrasonic Filter Slope:
36 dB/octave
Nominal Amplifier Frequency Response:
+0, -3 dB from 20 Hz to 20 kHz
Hum and Noise:
Greater than 90 dB below rated power
DDT Dynamic Range:
Greater than 21 dB
THD and IM:
Typically less than 0.5 %
Damping Factor:
Greater than 100 @ 1000 Hz, 4 Ohms
Power Requirements Of Peavey PVX
Nominal 160 Watts, 100-120 VAC 50-60 Hz (Domestic)
220-240 VAC 50-60 Hz (Export)
Enclosure Materials & Finish:
Black acrylic painted enclosure with 15 mm MDF, with a
full-length, black powder coated perforated steel grille.
DImensions (H x W x D)
In use position:
24.25" x 16.75" x 23.00"
(not including wheels, 4.06" deep)
616 mm x 425 mm x 584 mm
In transport position:
27.06" x 16.75" x 24.25"
687 mm x 425 mm x 616 mm
Net Weight:
76.Lbs. (34.5 kg)
Mounting Provisions:
1 3/8" pole mount with M20 threaded pole for stand
mounting a suitable speaker on top of the Sub, and four large
rubber feet on bottom for floor use.
p Sub System:
™