Indoor Unit Installation; Installing The Mounting Plate - McQuay K Serie Manual De Instalación

01_EN_3P257187-1A.fm Page 5 Thursday, November 12, 2009 12:01 PM

Indoor Unit Installation

1.

Installing the mounting plate

• The mounting plate should be installed on a wall which can support the weight of the indoor unit.
1) Temporarily secure the mounting plate to the wall, make sure that the panel is completely level, and mark the boring
points on the wall.
2) Secure the mounting plate to the wall with screws.
Recommended mounting plate retention spots and dimensions
Recommended mounting plate
retention spots (5 spots in all)
120.5
41.3
54.5
■English
All manuals and user guides at all-guides.com
Place a leveler
on raised tab.
203
160 50
Gas pipe end
330.5
Liquid pipe end
770
Keep here the piece cut out
from the unit for piping
* The removed pipe port cover can be
kept in the mounting plate pocket.
Use tape measure
as shown.
Position the end of
.
a tape measure at
101
247
41.3
160 54
Through-
331
the-wall
hole φ65mm
Drain hose
position
Removed pipe
port cover
A
Mounting plate
unit: mm
5