Wren V5US Manual Del Usuario página 3

Connect the power cable
Connect power cord to AC outlet.
Connect power cord to power
input on rear of speaker.
The power indicator in the center of the power button will flash white for
about 10 seconds, then turn off.
4
All manuals and user guides at all-guides.com
AC INPUT
100-240 VOLT
Power on to enter set up mode
Press power button.
The power indicator will blink white until the system is ready. When the
system is ready, the power indicator will remain solid white.
Turn on your speaker(s).
The first time you turn on the Wren V5US, it will start up in WiFi Connect
Mode (indicated by the WiFi indicator slowly blinking amber). In this mode,
the speaker is broadcasting a signal telling source devices that it is ready
to connect.
solid white
amber
5