Garbin 25GE VAP Manual De Instrucciones página 46

42
25GE VAP / 45GE VAP / 46PE VAP / 61GE VAP / 64PE VAP / 101GE VAP / 104PEVAP
HUMIDITY BUTTON
Can be set from 0 to 99
Default 00
Example of times:
100% = 60 sec. on
50% = 30 sec. on and 30 sec. off
10% = 6 sec. on and 54 sec. off
The display flashes the default value 0. Use the + and - buttons
to enter the data. During a cooking cycle, it is possible to vary
the data set by pressing the humidity button again. At this point,
the display flashes and data entry is repeated.
CORE PROBE TEMPERATURE BUTTON
Pressing the core probe button:
the yellow LED lights up and does not flash.
The display time is changed from three digits to two digits (00).
Can be set from 0 °C to 99 °C
Default 0 °C
the time button is excluded.
The process is the same to set the data. The time display
flashes and displays the set point.
The time display when the oven starts shows the temperature
recorded at the core of the product.
On reaching the core probe set point, the oven acts in the same
way as when as the timer reaches 0.
3.2.1d - MODELS
ELECTRIC VENTILATED OVENS
pict. 16
pict. 17
pict. 18
GB