Home Decorators Collection 35442-HBUM Guía De Uso Y Cuidado página 11

Assembly - Flushmount
1
Preparing for mounting
WARNING: Make sure power is off before attempting
installation.
□
Loosen the two canopy screws (AA) located in the "L
shaped" slots.
□
Remove and save the two canopy screws (AA) in the round
holes.
□
Remove the decorative canopy bottom cover from the
canopy (C).
CC
2
Routing the wires
□
Loosen three mounting screws in the coupler located in the
center of the motor housing until the inside channel is clear.
□
Remove and save the set screw (GG) from the coupler.
□
Place the ceiling canopy (C) on top of the motor housing
and secure with the three mounting screws (II).
B
CC
C
11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
II
C
GG
G
C
II
G