LUND LN28565037 Instrucciones De Instalación página 3

To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer
over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. Mild soap
may be used also to clean the Running Board.
Front
(Fig 1) Passenger side front mounting location
Rear
(Fig 3) Thread Plastic Washers onto
all mounting studs. Passenger side
rear mounting location pictured
15-18 F150 CREW CAB & 2017 F250-350 SUPER DUTY CREW CAB
Passenger/right Side Installation Pictured
(3) Plastic
Insulation Washers
(Fig 2) Plastic Insulation Washer
(3) 8mm Plastic Washers
(3) 8mm Flat Washers
(3) 8mm Nylon Lock Nuts
(Fig 4) Typical Bracket
installation illustrated
Page 2 of 4
SR2 RUNNING BOARDS
9/25/17 (RA)