Power Boost Setting (Cooking Zones Marked With A P); Power Management - KÜPPERBUSCH EKI 607.2 Instrucciones De Montaje

Operation
Modules (power management)
28

Power boost setting (cooking zones marked with a P)

The power boost setting makes additional power available for induction
cooking zones. A large quantity of water can be brought to the boil very
quickly.
The power boost setting operates for 10 minutes, after which the power level
is automatically reduced to cooking level 9.
1. Press the power key
ting. The control lamp above the key will blink.
2. Then press the respective Plus key
cate the function to a specific cooking zone. The power display will show
a P. The control lamp above the key will go off.
3. After 10 minutes the power boost setting will switch off automatically. The
P will go off and the power level will switch down to 9.
Note:
In order to prematurely de-activate the power setting, press the Minus key

Power management

For technical reasons two cooking zones always comprise a module and
have a maximum power level.
If this power range is exceeded when a higher power setting level or the
power boost function is switched on the power management system will
reduce the power setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink, after which the highest-
possible power setting will be consistently displayed.
once in order to activate the power boost set-
or Minus key
GB
in order to allo-
.