Adjusting The Chain Tension - SHERCO 50 SE 2022 Manual Del Propietário

CHECKS AND MAINTENANCE
CHAIN

Adjusting the chain tension

A
B
94
To increase the logevity of the chain, it is recommended
that you periodically check the tension and always
keep it clean and lubricated.
The lubricant must not under any circumstances get
on the rear tire or the brake disc, otherwise the grip
of the tire on the ground and the action of the rear
brake would be reduced, this is very important as
control of the bike could to be impaired.
If the chain slack exceeds 20 mm you must adjust it.
• Loosen the axle nut
• Loosen the lock nuts
swingarm.
• Use the adjusting screws
reaching the desired tension.
• Tighten the lock nuts
swingarm.
• Tighten the axle
1
torque.
.
1
on both sides of the
A
on both sides until
B
on both sides of the
A
1 according to the specified