Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
H-1662, H-2897
H-2898, H-3491
DOG WASTE SYSTEM
RECOMMENDED TOOLS
Level (optional)
Dog Waste
Dog Waste
System Sign,
System Dispenser,
H-2898 x 1
H-2897 x 1
Dog Waste System Channel Post, H-1662 x 1
NOTE: Dog Waste System is designed to
mount to 2 x 2" steel square or channel post
(hardware included). Recommend mounting to
H-1662 8 ft. u-channel post. System can also be
mounted to fence, wall or wood post (hardware
not included).
1.
Drive H-1662 post approximately 24" into ground at
desired location. (See Figure 1)
Figure 1
24"
PAGE 1 OF 6
1-800-295-5510
uline.com
7/16" Wrench
Post Hole Driver
(Included with H-2897)
Dog Waste
System Receptacle,
H-3491 x 1
(Included with H-2897)
ASSEMBLY
Post
PARTS
H-1662HDWR HARDWARE KIT
(Included with H-2898 and H-3491)
Key x 2
H-2897 HARDWARE KIT
S-15585 Dog Waste
Sample Bags x 2
Lock Nut x 2
2. Mount waste receptacle to the lower section of post
using the receptacle's pre-drilled holes and
H-1662-HDWR hardware kit. (See Figure 2)
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6
Nut x 2
Washer x 2
2 x 5/6" Bolt x 2
Washer x 4
2½ x 1/4" Bolt x 2
Post
Receptacle
Figure 2
0621 IH-2897
Publicidad
Manuales relacionados para Uline H-1662
Resumen de contenidos para Uline H-1662
- Página 1 2 x 2" steel square or channel post using the receptacle's pre-drilled holes and (hardware included). Recommend mounting to H-1662-HDWR hardware kit. (See Figure 2) H-1662 8 ft. u-channel post. System can also be mounted to fence, wall or wood post (hardware not included). Post Drive H-1662 post approximately 24"...
- Página 2 Mount back wall of dispenser to steel post using the H-2897 hardware kit. (See Figure 4) Mount optional sign to the top of the post using H-1662-HDWR hardware kit. (See Figure 7) Figure 4 Figure 7 5. Fill dispenser with two boxed rolls (S-15585 dog waste sample bags).
-
Página 3: Ensamble
(Incluidas con H-2897) de Seguridad 1/2” x 1/4” Medianas 1 Poste Canal del Sistema para Desechos Caninos H-1662 ENSAMBLE NOTA: El Sistema para Desechos Caninos 2. Instale el bote para desechos en la sección más está diseñado para instalarse en un poste baja del poste utilizando los orificios preperforados cuadrado o poste canal de 2 x 2"... -
Página 4: Continuación Del Ensamble
Instale la pared posterior del despachador al poste de acero utilizando el kit Instale el letrero opcional en la parte superior del de tornillería H-2897. (Vea Diagrama 4) poste utilizando el kit de tornillería H-1662-HDWR. (Vea Diagrama 7) Diagrama 4 Diagrama 7 5. -
Página 5: Outils Recommandés
8 pi H-1662. Le système peut également être installé au mur, ou à une clôture ou un poteau Poteau en bois (matériel d'installation non inclus). Enfoncez le poteau H-1662 à environ 61 cm (24 po) dans le sol à l'emplacement désiré. (Voir Figure 1) Figure 1 Poteau Récipient... - Página 6 Installez le panneau arrière du distributeur au poteau en acier à l'aide du matériel Installez l'enseigne optionnelle en haut du poteau à d'installation H-2897. (Voir Figure 4) l'aide du matériel d'installation H-1662-HDWR. (Voir Figure 7) Figure 4 Figure 7 5.