Veet Infini'Silk Pro Manual Del Usuario página 3

11. Apply the TREATMENT SURFACE to the skin, making sure the skin is spread evenly
and smoothly. As soon as the TREATMENT SURFACE is in full contact with the skin,
the READY INDICATOR LIGHTS will start blinking.
12. Press the PULSE BUTTON. The device will first determine the colour of your skin.
If the colour of the skin is light enough for safe application, the device will flash a
pulse of light onto your skin, and the READY INDICATOR LIGHTS will turn off.
You will see a bright flash of light and simultaneously hear a subtle pop sound, which
is a normal noise for the device. You will feel a mild sensation of warmth and tingling.
Veet Infini'Silk™ Pro will immediately recharge for the next pulse. After 3.5 seconds
the READY INDICATOR LIGHTS will turn on again.
NOTE : As the PRECISION LAMP CARTRIDGE does not include a SKIN COLOUR
SENSOR, you must first confirm that the area to be treated passes the Skin Colour
Sensor test by pulsing it with the larger cartridge.
13. Remove the TREATMENT SURFACE from the treated area of skin.
14. Move the TREATMENT SURFACE to another area of skin. Use the pressure marks
the device just made on your skin to guide you for proper positioning of the next
pulse, avoiding both gaps and overlaps between pulses.
Try to avoid overlapping pulses!
Warning: Do not treat the same area of skin more than once per hair removal session!
Treating the same area of skin more than once per session increases the likelihood
of adverse effects.
15. Repeat the process until the entire treatment area is covered, without overlapping
pulses.
If your skin blisters or burns, STOP USE IMMEDIATELY!
All manuals and user guides at all-guides.com
3