GB
To replace the door, reverse this sequence.
Inspecting the seals
Check the door seals around the oven regularly. If the seals are damaged,
please contact your nearest Service Centre (see Assistance). We recommend
that the oven is not used until the seals have been replaced.
Replacing the light bulb
! Do not use the oven lamp as/for ambient lighting.
24
All manuals and user guides at all-guides.com
2. Lift up and turn the small levers located on
the two hinges (see diagram);
3. Grip the door on the two external sides
and close it approximately half way. Pull the
door towards you, lifting it out of its slot (see
diagram).
To replace the oven light bulb:
1.
Remove the glass cover of the
lamp-holder.
2.
Remove the light bulb and
replace it with a similar one: Wattage 25
W, cap E 14.
3.
Replace the glass cover (see
diagram).