Solo 460 Li Manual Original página 10

The spraying pattern can be set by turning the
spraying nozzle.
Turning anti-clockwise
produces a narrow, strong
jet.
Turning clockwise produces
a fine, scattered mist pattern.
When the spraying output clearly drops, the
battery needs to be recharged (see chap. 5)
7.2 Disposal of residual spray volume
Residual spray volumes of less than 20 ml
[0.68 oz] are no longer pumped effectively.
If you do not want to pour in any more spraying
agent and want to terminate spraying, collect
and dispose of the residual volumes in
compliance with the applicable laws and
provisions. Observe the specifications of the
spraying agent manufacturer.
At the end of the work, empty and clean the
sprayer according to chap. 8.1, wash face and
hands thoroughly and take off the work
clothing. Work clothing requires regular
washing.
Spray tank
Residual volume, (remaining liquid in tank that cannot be used)
Operating pressure
Permissible operating temperature
Maximum application volume
Filter
Pump system
Rechargeable battery (Li-Ion)
Output current
Charging time with minimum initial battery charge
Operating time with standard nozzle per charging cycle
USB changing output voltage
Weight Ready for operation, empty
Ready for operation, with max. filling volume
Dimensions
SOLO Kleinmotoren GmbH
Industriestraße 9
Postfach / PO Box 60 01 52
DEUTSCHLAND / GERMANY
Tel.: +49 (0)7031 301-0
info@solo-germany.com
ENGLISH 4
9 Technical data
Max. fill volume approx.
Mesh gauge
Rated voltage
Capacity
Height
Width
Depth
D-71069 Sindelfingen
D-71050 Sindelfingen
Fax: +49 (0)7031 301-149
http://solo.global
8 Cleaning and storage
8.1 Emptying and cleaning the spraying
agent tank
Empty the spraying agent tank every day after
use. Collect and dispose of the residual amount
of the spraying agents in accordance with
applicable laws and provisions. Observe the
information from the spraying agent
manufacturer. Flush the spraying agent tank
well with clean water. Run the battery-powered
sprayer once again with clear water.
Let the spraying agent tank dry while open after
cleaning.
8.2 Down periods and storage
Empty and clean the sprayer according to
chap. 8.1.
Keep the sprayer protected from sunlight in a
dry, frost-free and secure location at a
temperature of max. 35 °C [95 °F].
No open fireplaces or similar must be nearby.
Prevent unauthorised use – especially by
children.
0–40 °C [32–104 °F]
0.33 l/min [0.087 USgal/min]
1.0 [0.66 gal]
< 20 ml [0.68 oz]
2 bar [29 psi]
0.5 mm [0.020"]
Micro-Pumpe
3,7 V
1,4 Ah
1,0 A
Approx 1,5 h
Approx 1,0 h
5,0 V
0.3 kg [0.7 lbs]
1.3 kg [2.9 lbs]
270 mm [10.63"]
120 mm [4.72"]
120 mm [4.72"]