Ycle Ounters - Brightwell Duoplus Manual Del Usuario

C C
YCLE OUNTERS
The CYCLE COUNTERS mode, enables the user to view the total run time, or total number of cycles
performed by each pump for both Pre-Wash and Main Wash.
CYCLES
WASH CYCLES
00000
PUMP 1 TOTAL
00HRS 00MINS
PUMP 1 P/W TOTAL
00HRS 00MINS
PUMP 1 M/W TOTAL
00HRS 00MINS
PUMP 2 TOTAL
00HRS 00MINS
PUMP 2 P/W TOTAL
00HRS 00MINS
PUMP 2 M/W TOTAL
00HRS 00MINS
DUOPLUS
11
From the SETTINGS screen, use the
FORWARD/ACCEPT
mode. Press the
the CYCLE COUNTER mode.
The first screen will display the total number of wash cycles, which have been
run by the unit. Press the
If the UP and DOWN
will be re-set.
PUMP 1 TOTAL
000000 CYCLES
The user can toggle between the TOTAL RUN TIME view, and the TOTAL
CYCLES, by using the
pressed simultaneously, the viewed counter will be reset.
This screen will display the total run time for Pump 1 (Rear) during Pre-Wash.
FORWARD/ACCEPT
Press the
This screen will display the total run time for Pump 1 (Rear) during the Main-
Wash. Press the FORWARD/ACCEPT
This screen will display the total run time for Pump 2 (Front).
Press the FORWARD/ACCEPT
Note: These screens will only appear if MODE 2 has been selected.
The screens will display the total run time for Pump 2 (Front) during the Pre-
Wash and Main-Wash respectively.
Press the FORWARD/ACCEPT
UP
and
key to confirm your selection and enter
FORWARD/ACCEPT
keys are pressed simultaneously, the displayed counter
This screen will display the total run time for Pump 1
(Rear). Press the FORWARD/ACCEPT
UP and DOWN keys. If the
key to move on.
key to move on.
key to move on.
key to move on.
E
DOWN
keys to select the CYCLES
key to move on.
key to move on.
UP and DOWN
B L S
RIGHTWELL AUNDRY
NGLISH
keys are
- D
YSTEMS UOPLUS