General Safety Instructions - Joycare JC-473N Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
All manuals and user guides at all-guides.com
mA is ideal) in the electric circuit of the bathroom. Ask
your installer for advice.

GENERAL SAFETY INSTRUCTIONS

Before using this product, please read carefully this instruction manual.
It is advisable to save these instructions for a future use.
Before connecting the appliance, check the voltage indicated on the appliance corresponds to the local mains voltage.
Always unplug the appliance:
- When it is not in use
- When you attach accessories
- Before cleaning it
- In case of troubles
Unplug the appliance, only after having switched it off. Never try to unplug the product pulling it from the cable or from the product itself.
Never wind the cord around the main body.
In order to protect children from risks of electrical shocks, never leave the appliance unattended when it is plugged in. Always store it out
of their reach.
Check regularly both the product and the cable: in case you find some damages, the product must not be used.
Do not try to repair the product by yourself but always address to authorised centres.
Keep the device and the cable away from heat, direct sunlight, moisture, sharp objects and similar ones.
Never leave the product unattended if switched on! Switch it off and unplug it when you do not use it, even if it is only for a while!
Use original accessories only.
When hairdryer is working, its air inlets and outlets must never be closed.
The product must not be absolutely plunged in water or other liquids or coming in contact with them! Never use the appliance with wet or
moist hands.
In case the appliance becomes moist or wet , please unplug it immediately from the socket.
DO NOT TRY TO REACH THE PRODUCT INTOWATER!
Use the device only for its intended purpose
In order to avoid possible fires and damages to the product, never use and place the product under blankets, towels or cushions.
In order to avoid the pro from possible overheating, it is advisable, to unwind completely the cable and not to keep the product switched
on if it is not in use.
If the supply cord is damaged, it must be changed by manufacturer or by its service agent or by a qualified person in order to avoid an hazard.
If the item is used in bathroom, unplug it after use since the proximity of water presents an hazard even when the item is switched off.
Attention: the nozzle becomes hot during operation.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido