Fig. 46
Fig. 47
4. Hook the end of the line in one of the slots on the spool
(Fig. 48).
Fig. 48
Slot
Spool
5. Fill the second half of the spool by repeating step 3.
Spool line
6. Re-install the spool as instructed in steps 4 to 7 of
m
injury.
NOTE: The maximum recommended length of line in the spool
is 26.3 ft (8 m), with 13.1 ft (4 m) per slot.
21
Insert the end of the second line in the opposite side of
the spool (Figs. 49 - 51), and begin winding.
Fig. 49
Fig. 50
Fig. 51
Spool
"Replacing the Spool + Clearing Jams and Tangled Lines".
CAUTION!
Catapulted pieces of nylon line may cause
Slot