Eiko SEN5A/PIR/Z10 Manual Del Usuario página 4

COMMISSIONING TOOL:
KEY:
PRESS THE ON/OFF BUTTON, THE LIGHT
GOES TO PERMANENT ON OR PERMANENT
OFF MODE, THE SENSOR IS LOCKED, MUST
ON/
PRESS "AUTO" TO QUIT FROM THIS MODE.
OFF
DISPLAY CURRENT PARAMETERS.
DISP
UPLOAD THE SELECTED PARAMETERS TO
SENSORS.
SEND
ENTER IN THE SETTING CONDITION AND
NAVIGATE TO UP AND DOWN.
NAVIGATE TO RIGHT AND LEFT.
CONFIRM SELECTED PARAMETERS AND
OK
SAVING.
RESET
ADJUST THE BRIGHTNESS DURING HOLD
BRIGHTNESS:
TIME.
ADJUST SENSOR SENSITIVITY.
SENSITIVITY:
THE TIME OF LIGHT FIXTURE REMAINS AT
PROGRAMMED 70%/ 80%/ 100% LEVEL AFTER
HOLD TIME:
MOTION IS NOT DETECTED.
SELECT STAND-BY PERIOD AT 1MIN/ 30MIN/
STAND-BY
60MIN/ +∞
•
TIME:
EiKO Global | 23220 W 84th St, Shawnee, KS 66227 | (P) 1-800-852-2217
EiKO Canada | 81 King St, Barrie, Ontario L4N 6B5 | (P) 1-705-721-5189
OVERVIEW:
• THE WIRELESS IR COMMISSIONING TOOL IS A HANDHELD TOOL FOR REMOTE
CONFIGURATION OF IR-ENABLE FIXTURE INTEGRATED SENSORS. THE TOOL
ENABLES DEVICE TO MODIFY VIA PUSH BUTTON WITHOUT LADDERS OR
TOOLS, AND STORES UP TO FOUR SENSOR PARAMETER MODES TO SPEED
CONFIGURATION OF MULTIPLE SENSORS.
• USES BIDIRECTIONAL IR COMMUNICATION TO SEND AND RECEIVE SENSOR
SETTINGS AT MOUNTING HEIGHT UP TO 50 FEET. THE DEVICE CAN DISPLAY
PREVIOUSLY ESTABLISHED SENSOR PARAMETERS, COPY PARAMETERS, AND
SEND NEW PARAMETERS OR STORE PARAMETER PROFILES. FOR PROJECTS
WHERE IDENTICAL SETTINGS MAY BE DESIRED ACROSS A LARGE NUMBER
OF AREAS OR SPACES, THIS CAPABILITY PROVIDES A STREAMLINED METHOD
OF CONFIGURATION. SETTINGS CAN BE COPIED THROUGHOUT A SITE, OR IN
DIFFERENT SITES.
FUNCTION:
DEFAULT
SETTINGS:
NOTE: "+∞" MEANS BI-LEVEL DIMMING
CONTROL, FIXTURE NEVER SWITCHES OFF.
KEY:
PRESS "AUTO" BUTTON, THE SENSORS
STARTS TO WORK AUTOMATICALLY AND ALL
PARAMETERS REMAIN THE SAME AS THE LATEST
AUTO
STATUS IN AUTO MODE.
THE BUTTON "TEST" IS FOR TESTING PURPOSE
SENSITIVITY ONLY. THE SENSOR GOES TO TEST
MODE (HOLD TIME IS ONLY 2S) AUTOMATICALLY
TEST
AFTER COMMISSIONING, MEANWHILE THE
STAND-BY PERIOD AND DAYLIGHT SENSOR ARE
2S
DISABLED PRESS "AUTO" TO QUIT FROM THIS
MODE.
WHEN THE LIGHT LEVEL EXCEEDS THIS SETITNG,
THE LIGHTS WILL TURN OFF EVEN WHEN THE
SPACE IS OCCUPIED. ONCE THE LIGHT LEVEL
EXCEEDS THIS SETITNG, THE SENSOR WILL
WAIT AND MONITOR FOR 1 MIN IN ORDER TO
CONFIRM THE LIGHT LEVEL INCREASE IS NOT
TEMPORARY BEFORE FORCING THE LIGHTS TO
GO OFF. WHEN LIGHT LEVEL GOES
BELOW THE SETITNGS, THE LIGHT WILL TURN
ON EVEN WITHOUT MOTION DETECTION AFTER
1 MIN. THIS FEAUTRE IS DISABLED BY DEFAULT.
PRESS BUTTON TO CHOOSE
DAYLIGHT SENSOR SETPOINT ON/OFF.
FOUR MODES WITH EXISTING PARAMETERS
WHICH ARE AVAILABLE TO BE UPDATED AND
MODE MODE
1 2 SAVED IN MODES.
MODE MODE
3 4
SELECT /10LUX /30LUX /50LUX/X THRESHOLD
FOR SENSOR TO TURN LIGHT FIXTURE ON.
SELECT , CURRENT SURROUNDING LUX VALUE
DAYLIGHT
AS DAYLIGHT LUX THREHOLD, SELECT
BUILT-IN DAYLIGHT SENSOR STOPS WORKING,
SENSOR:
AND ALL MOTIONS DETECTED COULD TURN THE
LIGHT FIXTURE ON, NO MATTER HOW BRIGHT
THE NATURAL LIGHT IS.
SELECT THE STAND-BY DIMMING LEVEL AT
STAND-BY
0%/ 10%/ 30%/ 50%
DIM:
• NOTE: "0%" MEANS ON/OFF CONTROL.
FUNCTION:
, THE
eiko.com