Chef's Grill IR-TEC IR2818-1 Manual Del Usuario página 16

UNPACKING
After removing all parts and hardware pack from the top of the shipping box, and when the only part showing is the grill
head, use a ox cutting knife to slice down the sides of the box. Be careful of staples along shipping box edges.
b
Remove the corner supports from the box and the styrofoam side pieces from the grill head. With the aid of an assistant,
rest grill head on one of the styrofoam side pieces to protect grease tray. Allow grill head to rest on cardboard until
placing grill head on cart in Step 10.
Open grill lid and remove all packaged parts and packing material.
WARNING: Assemble and place the grill on a flat level surface. Compare the parts and hardware with the list
and diagrams. Do not attempt assembly if any part is missing or damaged.
Attach the casters and locking casters to the bottom panel with 12 screws; note that the locking casters are
at the back of the grill. Then, turn the bottom panel over.
Bottom Panel
Caster
Attach the magnet to the bottom panel with two
Magnet
All manuals and user guides at all-guides.com
5/32-32 x
16
Locking Caster
3/16-24 x 1/2"Screw
screws.
3/8"
5/32-32 x 3/8"Screw
Qty. 12
Qty. 2