Chef's Grill IR-TEC IR2818-1 Manual Del Usuario página 47

Slide the tank ring bracket onto the end of the tank ring. Attach the bracket to the rear panel with 2 screws.
5
Tank Ring
Loosen the two screws in the right and left side panel brackets 3 to 4 turns.
6
Insert the screws through the 2 holes at the base of each side panel and slide the bracket down until it
stops. Attach each bracket to the bottom panel with one 3/16-24 x 1/2 in. screw. Retighten the 4 loosened
screws.
Side Panel Bracket
All manuals and user guides at all-guides.com
Tank Ring Bracket
47
1/4-20 x 5/8"Screw
Qty. 2
3/16-24 x 1/2"Screw
Qty. 2