Cleaning - Pressalit CT 5000 Instrucciones De Uso Y Mantenimiento

Cleaning

Clean the change table after each use . Use ordinary soapy water . Rinse off
with fresh water and dry with a soft cloth . Wipe off any water on the bench
surface .
• Do not use an autoclave or other type of steam cleaner .
• Avoid aggressive cleaning agents containing acids or chloride .
• Never spray the change table directly with a high pressure cleaner .
• Avoid use of aggressive, abrasive, corrosive or chloride-based cleaning
or disinfecting products .
Always read the material safety data sheet (MSDS) and supplied
instructions of the cleaning, disinfecting or de-scaling agent and comply
with instructions for safe use, dilution, rinsing, drying, handling and
storage of the agent .
IMPORTANT
CAUTION
!
en
13