General Power Tool Safety Warnings - PAR PASSK 20-Li A1 Traducción Del Manual De Instrucciones Original

Rechargeable battery PAP 20 B3
Type
Rated voltage
Capacity
Cells
NOTE
► Note that the full performance of the unit
can only be achieved if the PAP 20 A3/
PAP 20 B3 battery is used .
High-speed battery charger PLG 20 C3
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
Noise emission value
Noise measurement value determined in
accordance with EN 62841 . The A-rated noise
level of the power tool is typically:
Sound pressure level
Uncertainty K
Sound power level
Uncertainty K
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Tightening screws and nuts of maximum permissible
size
Uncertainty
Wear hearing protection!
PASSK 20-Li A1
LITHIUM ION
20 V (DC)
4 Ah/80Wh
10
230–240 V ∼,
50 Hz (AC)
120 W
3 .15 A
T3.15A
21 .5 V (DC)
4 .5 A
approx . 60 min
II / (double insulation)
L = 93 .6 dB (A)
PA
K = 3 dB
PA
L = 104 .6 dB (A)
WA
K = 3 dB
WA
a = 9 .425 m/s
h
K = 1 .5 m/s
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool .
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate .
WARNING!
► Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece that is being worked,
the vibration and noise emission values can
deviate from the values given in these instruc-
tions during actual use of the power tool .
► Try to keep the load as low as possible .
Measures to reduce the vibration load are,
e .g . wearing gloves and limiting the working
time . Wherein all states of operation must be
included (e .g . times when the power tool is
switched off and times where the power tool
is switched on but running without load) .
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury .
2
Save all warnings and instructions for future
2
reference.
GB │ IE │ 3 ■