Product Description; Cleaning And Maintenance - Concept VT704x Serie Manual De Instrucciones

EN

PRODUCT DESCRIPTION

1 Power light indicator
2 Rotary thermostat knob
3 Rotary power switch
4 Air outlet grid
5 Integrated handle
6 Air intake grid
2
4
INSTRUCTIONS FOR USE
1. Place the appliance in a suitable place and make sure that the air intake and air outlet openings are not blocked, the
thermostat regulator is set to minimum and the switch is on the "0" position (Off).
2. Plug in the appliance, the light indicator lights up.
OPERATING MODE SETTING
0 Off
. Airflow without heating (heating coils are switched off)
.. Low power level 1000 W
... High power level 2000 W
46
5
1
3
6
THERMOSTAT KNOB SETTING
The appliance is equipped with a built-in thermostat, which is used to maintain the required temperature in the room.
1. Set the switch (3) to high power level and the thermostat (2) to maximum.
2. When the desired temperature is reached, slowly turn the thermostat knob (2) counterclockwise until you hear
a click.
3. The set thermostat will automatically switch on/off the fan and heating coils to maintain the desired temperature.
SAFETY FEATURES
1. The appliance is equipped with an anti-tip protection which automatically switches it off when it is accidentally
tipped over. When the appliance is returned to its normal operating position, it resumes operation.
2. The appliance is equipped with an overheat protection which switches it off if it is overheating. If this happens,
switch off the appliance and unplug it. Make sure that the air intake/air outlet openings are not blocked. Before
putting the appliance back into operation, let it cool down to reset the overheat protection.

CLEANING AND MAINTENANCE

Caution!
Before each cleaning of the appliance, unplug the power cord from the electrical outlet!
Make sure the appliance has cooled before handling it!
To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as they can damage the
surface of the appliance!
Clean and inspect the inlet and outlet grids of the appliance frequently to ensure good operation of the appliance and
to prevent overheating.
The dust in the appliance can be blown or vacuumed.
Never clean the appliance under running water, do not rinse it or immerse it in water!
CAUTION for cleaning: Do not use gasoline, benzene, thinner, aggressive detergents, etc., as this may damage the
heater. Never use alcohol or solvents.
VT704x VT704x
EN
47