Tabla de contenido
Publicidad
TROUBLESHOOTING
If you still have any
problems, contact to your
dealer to ask service.
20
Image is not displayed.
Image is not focused on the screen
The image of slide or negative film
is not displayed.
Head lamp will not light up as soon
as you press [LAMP] button.
The presenter will not operate by
remote controller.
Installing or Replacing Battery on Remote Controller
Installing or Replacing Battery on Remote Controller
1. Remove the cover of battery
1. Remove the cover of battery
compartment at the back of remote
compartment at the back of remote
controller.
controller.
3. Put the cover in place.
3. Put the cover in place.
2. Insert the battery cells in the battery
2. Insert the battery cells in the battery
compartment as positive(+) ends
compartment as positive(+) ends
contact the positive terminals.
contact the positive terminals.
•
Battery cell type: AAA type 1.5V
Caution
Random replacement of built-in battery by other
types of batteries may cause explosion.
Thus, the battery shall be replaced by the same
battery. And the used batteries shall be disposed
carefully because they can cause environment
pollutions.
21
Publicidad
Tabla de contenido
