General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PTHSA 20-Li B3 Traducción Del Manual De Instrucciones Original

Explanation of the symbols on the appliance
Read the operating instructions
and safety advice before initial
operation!
Wear protective gloves!
Wear safety shoes!
Wear ear muffs!
Wear a hard hat!
Wear safety goggles!
Keep bystanders away from
the appliance!
Protect the appliance from rain
and moisture!
Risk of fatal electrical shock!
Keep at least 10 m away from
overhead power lines.
Attention! Falling objects.
Especially when cutting above
head height.
Attention! Risk of injury due to
running blades.
Sound power level LWA data
88
in dB.
│ GB │ IE
■ 4
General power tool
safety warnings
WARNING!
► Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
PTHSA 20-Li B3