Terratek PBG6 Manual Del Usuario página 9

All manuals and user guides at all-guides.com
Double Insulated Power Tools
Plug and Outlet, 2 prong
Outlets for 2-Prong Plug
Any electric powered tool that is marked "Double Insulated" only needs a two prong
connection and will be perfectly safe to operate.
These tools do not require grounding as they are fitted with an additional insulation
system internally that complies with all relevant electrical safety standards.
Unlike the three prong tools these tools CAN be connected through outlets suitable
for two prong or three prong plugs.
The illustration above shows the outlets that this type of tool can be connected to.
Any power tool marked "Grounding Required", MUST only be connected to a three
wire extension cord. Only double insulated tools can be connected to twowire cords.
When using any extension cord the machine will suffer a power reduction due to the
drop in voltage caused by the length of the cord. This can be partially offset by selec-
ting extension cords with lower gauge wire.
e.g. Cords marked 14 gauge can carry a higher current than cords marked 16 gauge,
therefore when linking extension cords make sure each cord wire gauge matches.
Note: Outdoor extension cords used in must carry the letters "W-A" (USA)) or "W"
(Canada)
Check all extension cords for damage before use.
Avoid sharp objects.
Do not position cord where it could be subject to traffic passing over it.
Page8