16 EN
The following table helps in localising and remedying minor faults. If you cannot resolve the
problem with the steps described, please contact customer service.
fault
The control indicator (5)
does not light up after insert-
ing the mains plug or during
heating.
The fuse in the fuse box
blows.
Liquid leaks out of the appli-
ance.
All manuals and user guides at all-guides.com
Troubleshooting
Possible cause
Indicator lamp defective
Too many appliances con-
nected to the same power
circuit.
No fault detected.
Appliance not standing
evenly.
Drip tray is too full.
Remedy
Contact customer service.
Reduce the number of appli-
ances on the power circuit.
Contact customer service.
Make sure that the appliance
is standing evenly
Only fill the drip tray up to the
"MAX" mark.