Pre-Installation; Wiring Diagrams - AmazonBasics B089R7J1CQ Manual Del Usuario

Pre-Installation

WIRING DIAGRAMS

CAPACITOR FOR
LONG LIFE OF
MOTOR
Quick Connect Wire Connectors INSTRUCTIONS
To be sold only with installation instructions.
PRODUCT
WARNING
WARNING
CAUTION
NOTICE
NOTICE
• Strip all wires so 3/8 in. – 1/2 in. of the copper wire is exposed.
• Firmly grip wire and insert stripped end of wire into open port of quick connect wire
connector. Only insert one wire per port. Wires should only be inserted into quick
connect wire connectors that have same color wire covering.
• Ensure stripped end of wires are tight and fully inserted to back of connector.
6
Automatic terminal switch
Black wire
White wire
MOTOR
Green wire
FAN HOUSING
QUICK CONNECT
WIRE CONNECTOR
PRODUCT WIRES
QUICK CONNECT
WIRE CONNECTOR
HOUSE
WIRES
Wiring must comply with all applicable electrical codes. Turn OFF
power at the service panel before removing or installing connectors.
COPPER TO COPPER ONLY. Do not use Aluminum wire.
Quick Connect Wire Connectors installation should follow the
instructions below.
Quick Connect Wire Connectors are reusable on solid wires of the
same wire gage or smaller. Do not reuse the connector on stranded
wires.
The acceptable solid wire range is 12-18 AWG.
TO SWITCH
TO NEUTRAL
TO GROUND
Junction box
HOUSE WIRES