Setting The Temperature - PRIXTON KITCHEN GOURMET KG200 Manual De Instrucciones

5 3910RPM
• The speed can be adjusted in 10 steps:
– Speeds 1 – 4: for the mixer attachment;
– Speeds 9 – 10: for the blade assembly.
Caution!
– The mixer attachment may be used only at speeds 1 to 4.
– When blending liquids on level 9-10, do not exceed a quantity
of 1 litre in the blender jug, otherwise liquid may spray out (see "7.
Using the blender jug"). At speeds lower than 9-10, the
blenderjug may contain up to 2 litre.
• The currently set speed is shown on the display;
• The speed can be modified while the appliance is in operation;
• If you press the button
pause.
• Clockwise rotation encoder at the same time the Speed will
automatically set to 1-10 then we can re-set the Speed.
Notes:
• If you select a speed from 7 to 10, the appliance will begin with speed
level 6 and gradually increase to the selected level. This is to prevent
liquid being thrown out of the blender jug due to sudden acceleration.
• If the blender jug is extremely full, the speed may be reduced
automatically.
This is done by interrupting the rotation of the blade assembly at two-
second intervals to prevent the motor from overheating.

6.4 Setting the temperature

You can press the
clockwise rotation encoder ;the display will show:
Clockwise or counter clockwise rotation of the encoder until the desired
temperature is displayed the temperature will count up in
10℃intervals.
• You can set up temperatures between 30 °C and 120
• The currently set temperature is shown on the display
1700 RPM
while the appliance is in operation, it will
button, select the temperature setting, then
10 10350 RPM
13
4500 RPM
°C.