Youin BK3000 Manual De Usuario página 22

8. LCD Display
· Switching the Lighting ON/OFF
Long press the UP button over 1 second to turn on the headlight, the display shows
Headlight icon, the brightness of backlight decreases and the icon disappears after 5
seconds. Long press UP button again for more than 1 second to turn off the headlight,
the display shows Headlight OFF icon, and backlight brightness restores and the icon
disappears after 5 seconds.
Turn ON/OFF headlight display interface
· Assist Level Selection
Short press UP or DOWN button to switch the
assist level so that change motor output power. The
default assist level ranges from 0-5 levels. Level 0
is to stop power output, Level 1 is the lowest power,
and Level 5 is the highest power. Press the UP or
DOWN button to switch between the assist levels
of E-Bike system and adjust the motor assist.
Level shift display interface
· Motor Power Indication
The motor output power can be known through
display, and the display mode is shown as below:
Motor output power indication interface
· Battery Indication
The battery power is displayed in 5 segments. When the battery voltage is high,
the five-segment LCD will be on. When the battery is under-voltage, the battery
frame flashes at the frequency of 1Hz which indicates that it needs to be charged
immediately.
Battery under-voltage flashing
Battery display
22
YOU-RIDE EVEREST