Warnings; Error Code Definition - Youin BK3000 Manual De Usuario

8. LCD Display
· TRIP Clear Function
In TRIP mode and TRIP value is NOT 0, press the UP and DOWN button at the same
time for more than 1 second to clear the TRIP data information.
· Exit Setting
In personalized parameter setting interface, short press Switch button to confirm the
input. Press and hold ON/OFF button to save the settings and exit the current setting.

8.5 Warnings

Use the display with caution. DO NOT attempt to release or link the connector when
battery is power on.
· Try to avoid hitting the display.
· DO NOT modify system parameters to avoid parameter disorder.
· Make the display repaired when error code appears.
Software version of this display may be different. Please always refer to an actual
version.

8.6 Error code definition

Error Definition
code
90
Torque Zero Error
11 Torque Out Range
92 Torque Sensor Fault
13 Gear Sensor Error
15
Speed Sensor Error
18
Cadence Error
20 PCB Over-Temp Warning
A1 PCB Over-Temp Error
22 PCB Sensor Fault
25
Motor Over-Temp Warning
A6 Motor Over-Temp Error
A7 Flash Error
80 Communication Lost
32 LORA Communication Lost
01
CRC Communication Error
40 Motor EST Error
41 Motor Over-Peak Current
C2 Motor Loss Phase
43
Motor Over DC Current
D0
Battery Over Voltage
51 Battery Low Voltage
52 Battery Over Current
E0 Battery Version Error
E5
Display Version Error
25
ENGLISH