Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
7
TROUBLESHOOTING
Problem
Pump has following
problems:
failure to produce
pressure,
erratic
pressure,
chattering,
loss of pressure,
low water
volume.
Detergent fails to mix with
spray.
Engine shuts down during
operation.
Cause
I.
Low pressure spray tip installed.
2.
Water inlet is blocked.
3.
Inadequate water supply.
4.
Inlet hose is kinked or leaking.
5.
Clogged inlet hose strainer.
6.
Water supply is over 100°F.
7.
High pressure hose is blocked or
leaks.
8.
Gun leaks.
9.
Nozzle
is obstructed.
10. Pump isfaulty.
I.
Detergent siphoning tube isnot
submerged.
2.
Chemical filter is clogged or
cracked.
3.
Dirty in-linefilter.
4.
High pressure spray tip installed.
Out of gasoline.
Correction
I.
Replace spray tip with high pressure
spray tip.
2.
Clear inlet.
3.
Provide adequate water flow.
4.
Straighten inlet hose, patch leak.
5.
Check and clean inlet hose strainer.
6.
Provide cooler water supply.
7.
Clear blocks in outlet hose.
8.
Replace gun.
9.
Clean nozzle.
10. Contact Authorized service facility.
I.
Insert detergent siphoning tube into
detergent.
2.
Clean or replace fitter/detergent
siphoning tube.
3.
See "Check In-Line Filter".
4.
Replace spray tip with low pressure
spray tip.
Fill fuel tank.
m
Publicidad
Tabla de contenido
