RIDGID R41121 Manual Del Operador página 18

ASSEMBLY
 Remove the sliding miter fences by pulling them up and
away from the miter table.
 Using the supplied hex wrench, loosen the socket
head screws that secure the fence to the miter table.
See figure 15.
 Rotate the fence left or right until the saw blade is parallel
with the square.
 Retighten the screws securely. Check blade squareness
to fence and readjust if necessary.
 Replace the sliding miter fences.
Your saw has several scale indicators. After squaring adjust-
ments have been made, it may be necessary to loosen the
indicator screws and reset them to zero. See Figures 19 - 20.
BLADE
SLIDING
MITER
FENCE
VIEW OF BLADE NOT SQUARE WITH FENCE,
ADJUSTMENTS ARE REQUIRED
All manuals and user guides at all-guides.com
SQUARE
MITER
TABLE
Fig. 18
INDICATOR
SCREW
MITER
SCALE
SCALE
INDICATOR
BEVEL
SCALE
18 - English
SCALE
INDICATOR
SCALE
INDICATOR
INDICATOR
SCREW
Fig. 19
Fig. 20