Polk Audio Monitor XT12 Serie Manual Del Propietário página 5

IC Information (For Canadian Customers)
CAN ICES-3(B)/NMB-3(B)
FCC Information (For US Customers)
1. Compliance Information
This product complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this product
may not cause harmful interference, and (2) this product must
accept any interference received, including interference that
may cause undesired operation.
2. Important Notice: Do Not Modify This Product.
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modification not expressly approved by Sound United may void
your authority, granted by the FCC, to use the product.
3. NOTE: This product has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FFC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This product generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
product does cause harmful interference to radio or television
reception, which can be determined by turning the product
OFF and ON, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the product into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the local retailer authorized to distribute this type
of product or an experienced radio/TV technician for help.
Notes on Use
• Avoid high temperatures.
• Allow for sufficient heat dispersion when installed in a rack.
• Handle the power cord carefully.
• WARNING! Hold the plug when unplugging the cord.
• Keep the unit free from moisture, water, and dust.
• Unplug the power cord when not using the unit for long
periods of time.
• Do not obstruct the ventilation holes.
• Do not let foreign objects into the unit.
• Do not let insecticides, benzene, and thinner come in
contact with the unit.
• WARNING! Never disassemble or modify the unit in any
way.
• Ventilation should not be impeded by covering the
ventilation openings with items such as newspapers,
tablecloths or curtains.
Polk Monitor XT12
• Naked flame sources such as lit candles should not be
placed on the unit.
• Do not expose the unit to dripping or splashing fluids.
• Do not place objects filled with liquids, such as vases,
on the unit.
• WARNING! Do not handle the mains cord with wet
hands.
• WARNING! When the switch is in the OFF (STANDBY)
position, the equipment is not completely switched off
from MAINS.
• The equipment shall be installed near the power
supply so that the power supply is easily accessible.
• Do not bend forcedly the plug on the equipment for
the connection between the connector and micro
USB/USB cable.
• CAUTION (for amplifier)! HOT SURFACE.
DO NOT TOUCH.
The rear metal panel over the internal heat
sink may become hot when operating this
product continuously. Do not touch hot areas,
especially around the "Hot surface" mark and the rear
metal panel.
OWNER'S MANUAL
5