Installation And Precautions; Setting Up; Self Diagnostics - Spracht Aura Professional Manual De Usuario

INSTALLATION AND PRECAUTIONS

For best performance of your Aura Professional™ Conference Phone,
please follow these recommendations:
• Avoid areas with high levels of background noise. The microphone(s)
might pick up extraneous sounds and prevent the conference phone from
going into receiving mode when you have finished talking.
• Avoid placing the phone where it would be subject to vibration.
• Place the unit on an even surface. Avoid locating it in a corner, under a
cabinet or next to a cabinet. Those kinds of locations will create an echo
effect.
• Keep objects 24"(60cm) away from the conference phone.
CAUTION
To reduce the risk of personal injury, fire, or damage, use only the supplied
power adapter.
SETTING UP THE AURA PROFESSIONAL™
1. Plug one end of the RJ11 Telephone Cable into the LINE jack on the
Junction Box. Plug the other end into a telephone wall jack. See page 5
for the connection diagram.
2. If you're going to use the optional extension microphones, plug one end
of the 4P4C cable to the EXT1 or EXT2 jack on the phone. The other end
plugs into the microphone. See page 5 for the Connection Diagram.
3. Plug one end of the 8 strand cable (8P8C) into the POWER jack of the
phone and the other into the EXT jack of the Junction Box.
4. Plug the DC adapter into the DC INPUT of the Junction Box and the AC
adapter into a standard AC outlet.
SELF-DIAGNOSTIC:
Plugging in the conference phone initiates the self-diagnostic program.
• The green, red and blue indicator LEDs will flash sequentially.
• A series of tones will sound when the diagnostic program is complete.
4